 |
|
Bergen, Norway 02 October 2017 |
 |
 |
|
| Bergen, Norway 02/10/17 | Bergen, Norway 09/06/19 | |
|
Name |
KL SALTFJORD |
|
Type |
Tug/Supply vessel - Type AH 12 CD |
|
IMO-number |
9470478 |
|
Call sign |
LGFT |
|
Flag |
Norway |
|
Port of registry |
Arendal |
|
GT |
8.360 t |
|
DWT |
Summer: 4.246 t |
|
NT |
2.508 t |
|
Reefer Sockets |
12x Reefer Container Sockets - 230 Volt |
|
Length |
95,21 m overall 84,82 m between perpendiculars |
|
Breadth |
24,00 m extreme |
|
Draught |
Summer: 8,85 m extreme |
|
Keel to antenna |
44,50 m |
|
Depth |
9,80 m to main deck |
|
Speed |
Max.: 18,5 knots Economic: 10,0 knots |
|
Built |
2001 |
|
Keel laid |
19/10/2009 |
|
Launch date |
21/07/2010 |
|
Date of completion |
14/04/2011 |
|
Builder casco |
STX RO Offshore Tulcea SA |
|
Builder completion |
STX Norway Offshore AS |
|
Yard number |
732 |
|
Hull material |
Steel |
|
Propulsion |
2x Wärtsilä 16V32 - 16 cylinder combustion engines: 7.680 kW at 720 rpm Hybrid propulsion 2x 4.500 kW |
|
Total power |
Installed: 27.000 kW (36.710 bhp) Propulsion: 25.000 kW (34.000 bhp) |
|
Propellers |
2x Controllable pitch propellers at 130 rpm Diameter: 4.900mm - 4 Blades |
|
Rudders |
2x Flap Rudder, Spade type Control: Synchro and Split mode |
|
Generators |
5x Caterpillar 3516C diesel engines 2.188 kW at 1.800 rpm coupled with AVK generators 2.100 kW |
|
Emergency generator |
1x Caterpillar C9 ACERT diesel generatorset |
|
Forward tunnel thrusters |
2x Wärtsilä FT250 - 1.200 kW Frequency driven electric motor Fixed pitch propeller |
|
Forward azimuth thruster retractable |
1x Wärtsilä FS225-MNR - 1.500 kW Frequency driven electric motor Fixed pitch propeller |
|
Aft tunnel thrusters |
1x Wärtsilä FT250 - 1.200 kW Frequency driven electric motor Fixed pitch propeller |
|
Aft azimuth thruster retractable |
1x Wärtsilä FS225-MNR - 1.500 kW Frequency driven electric motor Fixed pitch propeller |
|
Deck capacity |
Deck area: 750 m² (Approx.) Max payload: 10 t/m² Max deck cargo weight: 2.620 t Cargo rail height: 3,10 m |
|
Secondary winches |
Maker: RRM Brattvaag Type: 2ALM63170U, 170 t Number: 2 Pull: 170 t Static brake holding load: 210 t @1st Layer Dimension L: 4.500 mm Drum Diameter: 1.500 mm Flange diameter: 4.500 mm Special compartment: 1.100 mm Spooling device: Max side load 23 t |
|
Tugger winch midships |
Maker: RRM Brattvaag Type: LAKMX 132020 Number: 2 (Port and Starboard Side) SWL: 24 t Dimension L: 1.000 mm Drum diameter: 900 mm Flange diameter: 2.300 mm Wire rope capacity(on each drum): 24 mm : 6.400 m 32 mm : 3.500 m 77 mm : 500m Duty on 1st Layer: 24 t @ 22,0 m/min 16 t @ 33,0 m/min Remote Control: RRM portable wireless control system |
|
Tugger winch aft |
Maker: RRM Brattvaag Type: LAKMX 41017 Number: 2 (Port and Starboard Side) SWL: 17 t Dimension: Drum diameter: 460 mm Flange diameter: 900 mm Warping head L: 450 mm Diameter: 400 mm Wire rope capacity: (on each drum) 24 mm : 680 m 32 mm : 340 m Duty on 1st Layer: 17 t @ 29,0 m/min Remote control: RRM portable wireless control system |
|
Stern roller |
Maker: RRM Number: 2 MWL: 750 t SWL: 500 t Dimension: L: 3.000 mm Diameter: 4.500 mm |
|
Towing pins |
Maker: RRM Brattvaag Number: 2 MWL: BP 400 t / 600 sideway angle Locking arms MWL: BP 400t / 300 upwards angle Pulling down force: 60 t |
|
Stop (pop-up) pins |
Maker: RRM Number: 2 Sets, rotating type Dimension: L: 600 mm Diameter: 350 mm Position: In line with Stern Roller SWL : 200 t |
|
Shark jaws |
Maker: RRM Number: 2 MWL :800 t Inserts: 100-120 mm 125-166 mm |
|
Centering device |
Maker: RRM Number: 2 Working width: 2.000 mm Position: 1.000 mm to each side of shark jaw centre |
|
Pennant winder |
Maker: RRM Brattvaag Type: LAKCX 4108 Number: 1 Dimension diameter: 830/2.310 mm H: 630 mm Wire rope capacity: 76:mm : 200:m Tilt rotator: 360deg Rotation Tilt +/-40deg Position: Main Deck port side with hydraulic drive unit |
|
Dynamic positioning system |
System: K-POS-21 (IMO DPII) Class Approved for Closed Bus-Tie Operation Reference Systems: 1x DGPS Kongsberg Seatex DPS 132 1x DGPS/DGNSS Kongsberg Seatex DPS 232 1x Fanbeam MDL Laser MK4.2 1x Hipap Kongsberg Maritime Hydroacoustic Hipap 501 1x Radius System Preparation only |
|
A-frame |
Maker: MacGregor SWL: 250 t Inner Width: 15.500 mm (Leg) 10.500 mm (Top) Inner Height: 11.100 mm Outreach aft: 8,50 m Forward: 4,55 m |
|
Tank capacities |
Ballast: 3.469,2 m³ |
|
Anchor equipment |
Length: 577,50 m Diameter: 56 mm |
|
Accommodation |
Total: 70 Persons Single Cabins: 20 with SAT TV + Internet Access Double Cabins: 25 with SAT TV + Internet Access Hospital: 1 Offices: Bridge: 1x Ship’s Office / Radio Station D Deck: 1x Ship’s Office 1x Conference Room C Deck: 1x Client Office A Deck: 1x Client / Ship’s Office 1x Conference Room Lounges: D deck: 2 A deck : 1 Sky Lounge with SAT TV and home cinema surround system Gymnasium: 1 with Full equipment |
|
Manager |
OSM Ship Management AS |
|
Operator |
OSM Offshore AS |
|
Registered owner |
K Line Offshore AS N-4836 Arendal Norway |
|
Sister ships |
2011 KL Sandefjord - IMO 9470466 |
|
Latest data adjustment |
24 September 2019 |